| |
Casting:
Dimensional Guidelines & Tolerances |
|
Eagle Group Foundries offer steel and stainless steel castings,
precision investment castings manufacturing in both ferrous and
non-ferrous alloys, aluminum alloys and processes, permanent mold
castings, machining and assembly services
|
|
Note: All PDF files will open in a new window.
Eagle Alloy
- Dimensional Tolerance Standards
(PDF, 405K)
- Typical tolerance held: +/-.030”
per inch
- Typical weight range: 2 lbs - 380 lbs
net
- Largest overall dimensions: 30”
x 40” x 14”
- Typical production quantity: 100 pcs
- 5,000 pcs per run
Eagle Precision Cast Parts
- Standard Linear Tolerances (PDF, 23K)
- Typical tolerance held: +/-.005”
per inch
- Typical weight range: 1 oz – 85
lbs
- Largest overall dimensions: 24”
x 24”
- Typical production quantity: $750 minimum
order
Eagle Aluminum Cast Products – Perm Mold
- Permanent Mold
and Green Sand Dimensional Guidelines (PDF, 80K)
- Typical tolerance held: +/-.063”
(Sand) Perm mold - +/- .015 first inch and additional .002”
for every additional inch.
- Typical weight range:
- Perm mold -Anything under 1 lb. to 50
lbs.,
- Sand mold -competitive for 10 lbs. to
100 lbs.
- Largest overall dimensions:
- Perm mold - Capability of running
a casting up to 55” in length and currently running
55” in diameter on one particular casting
- Sand mold - we are capable of running
around 80” in length with largest flask size.
Largest flask is 33 x 78”
- Typical production quantity:
- Perm mold - Any where from 100 –
5,000 per run depending on size of part.
- Sand Mold - 50-1000 is typical. Annual
Volumes - 2,000 + for perm mold and 500 + for sand mold.
|
| |
|
